Thông số kỹ thuật thiết bị dò tia cực tím C7076A1015
đại lý C7076A1015 | nhà phân phối C7076A1015 | cảm biến ngọn lửa C7076A1015
Solid state dynamic self check flame detectors for use with BC7000, R4140 or FSP5075 with R7476 Amplifier and 7800 SERIES with R7886 Amplifier.
- Use Honeywell Flame Safeguard primary safety controls requiring adjustable sensitivity ultraviolet flame detection.
- Detect ultraviolet radiation from flames.
- Include dual sensitivity adjustment.
- C7076A meets NEMA 4 standards with viewing window rated to 20 psi.
- C7076D has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.
- Gas fired burners; Oil fired burners
- Dimensions (in.)
- 4 in. high x 4 in. wide x 10 1/4 in. deep
- Dimensions (mm)
- 102 mm high x 102 mm wide x 261 mm deep
- Used With
- Flame Amplifiers: R7476, R7886
- Weight (lb)
- 6.6 lb
- Weight (kg)
- 3 kg
- Dynamic self-checking flame detector with adjustable sensitivity
- 1 in. NPT
- Electrical Ratings
- 100 Vac
- 50 Hz; 60 Hz
- Approvals, Underwriters Laboratories Inc.
- Listed: File No. MP268, Guide No. MCCZ
- Approvals, Canadian Standards Association
- Certified: Master Report LR1620
- Electrical Connections
- Terminal block
- Power Consumption
- 7.0 W
- 0.5 G max
- Approvals, Swiss RE
- Approvals, Factory Mutual
- Approved: Report No. FM26980
- Ambient Temperature Range (F)
- -40 F to +160 F
- Ambient Temperature Range (C)
- -40 C to +71 C
- NEMA Rating
- NEMA 4