Cảm biến C7027A1064
Thông số kỹ thuật cảm biến ngọn lửa C7027A1064
- Use with Honeywell Flame Safeguard primary safety controls and burners requiring ultraviolet flame detection.
- C7027 mounts on a 1/2 in. sighting pipe by using an integral collar.
- Detectors can be wired in parallel for difficult sighting applications.
- C7027 seals against pressures up to 5 psi (34.5kPa) when correctly installed.
- Allows for blast tube mounting due to compact size.
- C7044 mounts with a two screw bracket.
- The C7044 UV sensor tube is enclosed in a stainless steel housing.
- C7044 has the capability of side or end viewing in flame monitoring applications.
- Application Coal fired burners; Gas fired burners; Oil fired burners
- Dimensions (in.) 1 1/16 in. diameter x 4 in. long
- Dimensions (mm) 27 mm diameter x 102 mm long
- Includes 1/2 in. NPT threaded spud connector.
- Used With Flame Amplifiers: R7249A, B, R7849A, B, R7749B, R7259, R7290
- Comments Detects ultraviolet radiation in flames
- Mounting Integral nut for 1/2 in. sighting pipe.
- Approvals, Underwriters Laboratories Inc.
- Listed: File No. MP268, Guide No. MCCZ
- Approvals, Canadian Standards Association
- Certified: Master Report LR95329-1
- Electrical Connections 2 NEC Class 1 lead wires
- Vibration 0.5 G max
- Approvals, Swiss RE Acceptable
- Approvals, Factory Mutual Approved: Report No. 24181.03
- Ambient Temperature Range (F) -40 F to 215 F
- Ambient Temperature Range (C) -40 C to 102 C
- Lead Length (in.) 288 in.
- Lead Length (mm) 7315 mm
đại lý C7027A1064 | nhà phân phối C7027A1064 | cảm biến ngọn lửa C7027A1064 | honeywell C7027A1064