Đại lý honeywell C7007A1001
đại lý C7007A1001 | cảm biến C7007A1001 | honeywell C7007A1001
Thông số kỹ thuật cảm biến ngọn lửa C7007A1001
- Use with pressurized fire boxes.
- Hold flame rods firmly over the pilot or burner with a chuck and setscrew arrangement.
- Provide electrical connection through a terminal screw.
- Allow ventilation to cool the unit or to minimize soot deposit through a 1/2 in.
- NPT tapping.
- Mount easily with sleeve or thread type mounting adapters, and a straight or angle body.
- Gas fired pilot or gas fired system.
- Dimensions (in.)
- 1 15/16 in. high x 2 3/16 in. diameter x 3 3/16 in. long
- Dimensions (mm)
- 49 mm high x 56 mm diameter x 81 mm long
- Used With Flame Amplifiers: R7247A, B, R7847A, B, R7257, R7289
- Comments Holder only, order Kanthal flame rod separately.
- Mounting 1/2 in.-14 NPT male
- Approvals, Underwriters Laboratories Inc.
- Listed: File No. MP268, Guide No. MCCZ
- Approvals, Canadian Standards Association
- Certified: File No. L95329-1
- Electrical Connections
- Terminal screw
- Required Components
- 102709A -12 in. Flame Rod; 102709B -18 in. Flame Rod; 102709C -24 in. Flame Rod; 102709D -36 in. Flame Rod; or 102709E -48 in. Flame Rod
- Approvals, Swiss RE
- Approvals, Factory Mutual
- Approved: Report No. 24181.03