The Solid State Ultraviolet Flame Detectors, sense ultraviolet radiation emitted by combustion flames. The flame detectors are used with Honeywell flame safeguard controls to provide flame supervision for gas, oil, or combination gas-oil burners.
Thông số kỹ thuật cảm biến Honeywell C7927A1016
- Properly installed the flame detectors are pressure rated for 5 psi.
- Flame detector is used with only the R7851B Flame Amplifier and the 7800 SERIES controls.
- Has an integral collar threaded (internal 1/2-14 NPSM) for mounting on a one-half inch sight pipe.
- Gas, Oil, or combination burners-intermittent operation only(burner cycled at least once each 24 hours).
- Dimensions (in.)
- 1 in. diameter x 3 3/4 in. long
- Dimensions (mm)
- 25 mm diameter x 95 mm long
- Used With
- Flame Amplifiers: R7851B
- Detects ultraviolet radiation in flames
- 1/2 in NPT pipe mounting
- Approvals, Underwriters Laboratories Inc.
- Component Recognized: File No. MP268
- Approvals, Canadian Standards Association
- Report 158158
- Electrical Connections
- 2 NEC Class 1 lead wires
- Approvals, Swiss RE Acceptable
- Approvals, Factory Mutual Approved: Report No. 3011020
- Ambient Temperature Range (F) -40F to +200F
- Ambient Temperature Range (C) -40 C to +93 C
- NEMA Rating NEMA 1
- Lead Length (in.) 96 in.
- Lead Length (mm) 2438 mm
- đại lý C7927A1016 | nhà phân phối C7927A1016 | cảm biến ngọn lửa C7927A1016